00@GLOBAL DATA@module.ent@entity.ent@hotspot.ent@
f8010p.html@Table Of Contents@f8010p.sgm@entity.ent@hotspot.ent@
s0000000000.html@ COVER@s0000000000.sgm@pana.gif@na_00.gif@na_01.gif@
s0100000000.html@1 INSTALLATION INSTRUCTION@s0100000000.sgm@
s0101000000.html@1.1 Check Installation Location@s0101000000.sgm@insta01.gif@
s0102000000.html@1.2 Connect tap adapter to water faucet@s0102000000.sgm@insta02.gif@
s0103000000.html@1.3 Connect external drain water hose@s0103000000.sgm@insta03.gif@
s0104000000.html@1.4 Install washing machine horizontally@s0104000000.sgm@insta04.gif@insta05.gif@
s0105000000.html@1.5 Connect supply water hose@s0105000000.sgm@insta06.gif@
s0106000000.html@1.6 Establish a ground (In case of two-wire power cords)@s0106000000.sgm@insta07.gif@
s0200000000.html@2 FEATURE AND TECHNICAL EXPLANATION@s0200000000.sgm@
s0201000000.html@2.1 Speedy washing time@s0201000000.sgm@
s0201010000.html@2.1.1 Split-level shower washing@s0201010000.sgm@na_02.gif@
s0201020000.html@2.1.2 New-Fill method (Normal, Speedy, Personal Cycle)@s0201020000.sgm@na_03.gif@
s0201030000.html@2.1.3 Reduce time of Intermediate-spin& Final-spin process@s0201030000.sgm@
s0201030100.html@2.1.3.1 Reduce time of Intermittent spin process@s0201030100.sgm@
s0201030200.html@2.1.3.2 Reduce time of Inertial running for spin brake action@s0201030200.sgm@
s0202000000.html@2.2 Spin rotation controls with rotary detector@s0202000000.sgm@
s0202010000.html@2.2.1 Detection of the pulsator pulley rotation with the rotary detector@s0202010000.sgm@na_04.gif@
s0202020000.html@2.2.2 Spin rotation controls@s0202020000.sgm@na_05.gif@
s0203000000.html@2.3 Laundry amount detects with rotary detector@s0203000000.sgm@
s0204000000.html@2.4 Detect of spin defect with bubble@s0204000000.sgm@na_06.gif@
s0300000000.html@3 FEATURE AND TECHNICAL EXPLANATION 2@s0300000000.sgm@
s0301000000.html@3.1 Home Dry Care Course(Preparation)@s0301000000.sgm@
s0301010000.html@3.1.1 Confirm whether or not your clothes can be washed.@s0301010000.sgm@na_07.gif@
s0301010100.html@3.1.1.1 Washable items (item can be washed in water, but cannot be scrubbed or handled roughly during washing)@s0301010100.sgm@na_08.gif@
s0301010200.html@3.1.1.2 Clothes that cannot be washed (because the problems below occur when immersed in water)@s0301010200.sgm@na_09.gif@
s0301010300.html@3.1.1.3 What is the "Home Dry Care" course?@s0301010300.sgm@
s0301020000.html@3.1.2 How to check for non-colorfastness@s0301020000.sgm@na_10.gif@
s0301030000.html@3.1.3 Method of pre-treating heavily soiled spots@s0301030000.sgm@na_11.gif@
s0301040000.html@3.1.4 Preparation of clothing before washing@s0301040000.sgm@na_12.gif@
s0301050000.html@3.1.5 Key points for washing@s0301050000.sgm@
s0302000000.html@3.2 Home Dry Care course(Finishing)@s0302000000.sgm@
s0302010000.html@3.2.1 Key points for drying(Do not use a dryer.)@s0302010000.sgm@na_13.gif@
s0302020000.html@3.2.2 Key points for ironing@s0302020000.sgm@na_15.gif@
s0302020100.html@3.2.2.1 Ironing sweaters and knits@s0302020100.sgm@na_16.gif@
s0302020200.html@3.2.2.2 Ironing skirts@s0302020200.sgm@na_17.gif@
s0302020300.html@3.2.2.3 Ironing slacks@s0302020300.sgm@na_18.gif@na_19.gif@
s0302020400.html@3.2.2.4 Ironing tips@s0302020400.sgm@
s0302030000.html@3.2.3 When this occurs@s0302030000.sgm@
s0302030100.html@3.2.3.1 How to fix shrinkage@s0302030100.sgm@na_20.gif@
s0400000000.html@4 DISASSEMBLY INSTRUCTIONS AND ADJUSTMENTS@s0400000000.sgm@
s0401000000.html@4.1 Caution to be observed when trouble shooting@s0401000000.sgm@na_21.gif@
s0401010000.html@4.1.1 Print circuit board@s0401010000.sgm@na_22.gif@na_23a.gif@na_24a.gif@na_25.gif@na_26a.gif@
s0401020000.html@4.1.2 Water level detector, Safety switch Feed valve replacement.@s0401020000.sgm@na_27.gif@na_28.gif@na_29.gif@
s0401030000.html@4.1.3 Motor replacement@s0401030000.sgm@na_30.gif@na_31.gif@
s0401040000.html@4.1.4 Mechanism case replacement@s0401040000.sgm@na_32.gif@na_33.gif@na_34.gif@na_35.gif@na_36.gif@na_37.gif@na_38.gif@
s0401050000.html@4.1.5 Rotary detector@s0401050000.sgm@na_39.gif@
s0401060000.html@4.1.6 Suspension  replacement@s0401060000.sgm@na_40.gif@
s0500000000.html@5 CHECK INPUT AND OUTPUT VOLTAGE OF THE P.C BOARD@s0500000000.sgm@na_41.gif@
s0501000000.html@5.1 Measure output voltage of the electrical parts connector's on the P.C Boaed.@s0501000000.sgm@
s0502000000.html@5.2 Measure each resistance after removed connectors.@s0502000000.sgm@na_42.gif@
s0600000000.html@6 TEST RUNNING WITHOUT WATER@s0600000000.sgm@
s0601000000.html@6.1 METHOD TO TEST RUNNING WITHOUT WATER@s0601000000.sgm@hyouji.gif@na_44.gif@
s0601010000.html@6.1.1 Error indication descriptions@s0601010000.sgm@na_45.gif@
s0700000000.html@7 SCHEMATIC DIAGRAM@s0700000000.sgm@na_46.gif@
s0800000000.html@8 EXPLODED VIEWS AND REPLACEMENT PARTS LIST@s0800000000.sgm@
s0801000000.html@8.1 SMALL STANDARIZED PARTS@s0801000000.sgm@
s0802000000.html@8.2 LOCATION OF PARTS-A@s0802000000.sgm@na_47.gif@
s0803000000.html@8.3 REPLACEMENT PARTS LIST-A@s0803000000.sgm@
s0804000000.html@8.4 LOCATION OF PARTS-B@s0804000000.sgm@na_48.gif@
s0805000000.html@8.5 REPLACEMENT PARTS LIST-B@s0805000000.sgm@
s0806000000.html@8.6 LOCATION OF PARTS-C@s0806000000.sgm@na_49.gif@
s0807000000.html@8.7 REPLACEMENT PARTS LIST-C@s0807000000.sgm@
s0808000000.html@8.8 PACKING INSTRUCTIONS@s0808000000.sgm@na_50.gif@
s0809000000.html@8.9 REPLACEMENT PARTS LIST@s0809000000.sgm@